Big Wall Hammer

Original Vintage A5 Big Wall Hammer

As an example of how 4130 Chromoly steel goes from stock billets to production part (pitons would be similar), here are my notes from making the A5 hammer in 1986.

Second batch of 250pcs (1996) had yellow handles.

In the mid-1980s, there were no good big wall hammers being produced, and the rare second-hand drop-forged Chouinard Yosemite Hammers (first made in 1965, but out of production in the 1970s) or the fiberglass-handled Forrest wall hammer (which some preferred, but also sold out) would have a number of bidders in the Camp IV parking lot, going for more than the price of a couple of ropes, a hefty investment.

I don’t recall who I bought my first second-hand Chouinard Yosemite Hammer, but it was a game changer in the way it brought a bit more elegance to my developing skills of pitoncraft by being the right size and weight, and most importantly, feel, for those tricky placements where one is holding their body into a 5.9 position, and absolute precision and care is required to place a good pin (without dropping it). I went through a few Yo Hammers and often repairing tangs or replacing handles in my 1980s dozen-bigwall-a-year routine.

After getting rescued from Half Dome in May 1986, which disheartened me, and a small car wreck, which bankrupted me, I discovered I had access to money as part of a tax-relief fund set up when I was born, with parents able to set aside $2000 tax free each year for their dependents (ok, a trust fund). In 26 years, it had apppreciated to over $100,000, so I soon tapped into it and decided to invest a big chunk of it into making big wall climbing hammers.

Everyone thought I was nuts. The age of pitons was over, and there would never be a market for that kind of big wall climbing gear ever again. Charles Cole had just set up 5.10, named after the classic free climbing grade, so I decided to call my business, A5 Adventures, named for the reputed top-of-the-scale aid grade. After trying to organise the business from my POB 3580 at the Yosemite Lodge, I needed an office and shop, so moved to Flagstaff, Arizona, which had great climbing and other innovators (Steve Byrne of Wired Bliss).

In mid-80s, the industry was moving toward investment casting for a lot of parts that had previously been forged, and many forging companies were going out of business. Investment cast was tempting, as it creates strong parts and is a much cheaper process, but forgings provide better grain structures for percussion tools.

The first step in making a forged part was to go to the local Public Library and copy the contact details for companies listed in the Thomas Register, a 20-volume set of catalogs listing every manufacturer in the United States (now it is all online). Then, draw and copy a blueprint, specify material, and send this information to at least a few dozen companies listed in the Thomas Register. About eight companies would send quotes back. Some quotes were outrageously high, usually meaning the quantity wasn’t sufficient for their production schedules, and some were too low indicating that they really didn’t have the capability to produce the part as specified. Ajax forge in Lost Angeles had the best quote, and looked like the best outfit for the job. I found out 15 years later from talking to Tom Frost that Ajax Forge was also the supplier for early Chouinard forgings.

The parts would come from the forging company with a “draft” (angled surfaces so the part didn’t get stuck in the forging dies), so the front face had to be milled and a carabiner hole drilled. I bought a mill for this purpose, and donated it to Steve Byrne’s Wired Bliss shop in exchange for full use of the shop. The pick also needed to be ground on a grinder and 6” sander to optimise copperhead setting and piton removal. Basically, the A5 Hammer was a marginally improved big wall hammer, which combined the best features of the Chouinard Yosemite Hammer (with its hickory handle and tang design) and the Forrest (which had a nicer pick and also a carabiner hole). It was built to fill an important hole in the market. Because of its heft, balance, and aligned grain structure , it also became a preferred hammer for drilling bolts by hand, which was essential work in the wilderness, where motorised equipment is not allowed.

Five hundred parts is the minimum order, and with a per unit cost of $20, plus the milling machine, tang and handle production, all told, the hammers became a $20,000 project (the project had a 10% overrun, so 540 were made in the first batch). Handles came from the OP Link handle company, which at the time, were used on the best carpenter’s hammers (a lot of carpenter friends—Jim Gaun, Bob Granger plus all my desert climber friends—Stan Mish, LB, Dan Langmade, Dave Insley—knew hammers and provided insight). The trick is getting the balance and weight just right, matched to the length of the handle. So lots of little design details that you have options, but getting it right the first time is vital for a big production investment. I built wood models with woods of different densities to make adjustments.

The words "A5'' are staped on the shell surface.
Length: 32,5 cm
Width:  12 cm

Source of information: catalog No. 037

Customer Reviews

Based on 1 review Write a review

Related Items